LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LS, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System >> Diagnostic Information and Procedures >> DTC B096C or B096D: Parking Assist Side Sensor Circuit >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify DTC B1405 is not set.
    • If the DTC is not set 
  3. Verify DTC B096C 01, B096D 01, B096C 21 or B096D 21 is not set.
    • If any of the DTCs are set 
    1. Verify none of the B94 Side Object Sensors - Front are contaminated with snow, mud, dirt, slush or ice.
      • If contaminated, clean the B94 Side Object Sensors - Front.
      • If there is no contamination.
    2. Refer to Circuit/System Testing.
    • If none of the DTCs are set 
  4. Verify that DTC B096C 3A or B096D 3A is not set.
    • If any of the DTCs are set 

      Replace the appropriate B94 Side Object Sensor - Front with the correct sensor type.

    • If none of the DTCs are set 
  5. Ignition ON.
  6. Verify the scan tool Parking Assist System Status parameter is Enabled.
    • If the Parking Assist System Status parameter is Disabled 

      Refer to Circuit/System Testing.

    • If the Parking Assist System Status parameter is Enabled 
  7. All OK.