Fastener Specifications
Single Use Non-Threaded Fasteners/Components
| Application |
|---|
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
| O-ring Seal |
| Sealing Washer |
Reusable Threaded Fastener Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
| Air Conditioning Compressor and Condenser Hose Bolt | 22 N.m (16 lb ft) |
| Air Conditioning Compressor and Condenser Hose Nut | 22 N.m (16 lb ft) |
| Air Conditioning Compressor Bolts | 22 N.m (16 lb ft) |
| Air Conditioning Compressor Clutch Nut | 15.7 N.m (12 lb ft) |
| Air Conditioning Condenser Baffle Bolt | 10 N.m (89 lb ft) |
| Air Conditioning Evaporator Hose Nut | 22 N.m (16 lb ft) |
| Air Conditioning Refrigerant Pressure Sensor | 6 N.m (53 lb ft) |
| Blower Motor Resistor Screw | 2 N.m (16 lb ft) |
| Heater and Air Conditioning Evaporator and Blower Module Fastener | 9 N.m (80 lb ft) |
| Thermal Expansion Valve (TXV) Block Nut | 22 N.m (16 lb ft) |
| Thermal Expansion Valve (TXV) Mounting Bolt | 7 N.m (62 lb ft) |