LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Silverado 1500 SSV, 4WD, Part Time T/Case Control, Gas >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Removal Procedure

Removal Procedure

  1. Place the ignition switch in the OFF position.
  2. Remove the brake pressure modulator valve (BPMV) assembly. Refer to Brake Pressure Modulator Valve Replacement .
    3. Fig 1: BPMV Bolt
    GM3255837Courtesy of GENERAL MOTORS COMPANY
  3. Remove the BPMV bolt (1).
    4. Fig 2: BPMV Bracket
    GM3255841Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not pry on the accumulator caps on the underside of the BPMV.

  4. Carefully separate the BPMV assembly from the BPMV bracket insulators and remove the BPMV bracket (1).
  5. Inspect the insulators for damage and replace, if necessary.
scientia non olet · About LEMON Manuals