Fastener Specifications
WARNING: This page is about a different car, the 2016 GMC Sierra 1500 and 2016 Chevrolet Silverado 1500. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Generator Bolt (L8B) | 36 N.m (27 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Accessory DC Control Module Bolt | 9 N.m (80 lb in) |
| Accessory DC Control Module @ Plenum Nut | 22 N.m (16 lb ft) |
| Accessory DC Control Module @ Wheelhouse Nut | 9 N.m (80 lb in) |
| Battery Positive Cable Nut | 9 N.m (80 lb in) |
| Battery Positive Post Clamp Nut | 5 N.m (44 lb in) |
| Front End Sheet Metal Diagonal Brace Bolt | 25 N.m (18 lb ft) |
| Generator Control Module 3 Phase Cable Mounting Bolt | 9 N.m (80 lb in) |
| Generator Control Module 3 Phase Cable Terminal Bolt | 8 N.m (71 lb in) |
| Generator Control Module Mounting Nut | 22 N.m (16 lb ft) |
| Ground Terminal Fastener | 9 N.m (80 lb in) |
| Heat Shield Bolt | 9 N.m (80 lb in) |
| Hybrid Powertrain Control Module 2 Mounting Nut | 9 N.m (80 lb in) |