Removal Procedure
- Raise and support the vehicle. Lifting and Jacking the Vehicle
.
- Remove the front wheel. Tire and Wheel Removal and Installation
.
Courtesy of GENERAL MOTORS COMPANY
- Disconnect the front position sensor harness connector (1) from the front position sensor.
- Unclip the harness clips (2) from the front position sensor.
Courtesy of GENERAL MOTORS COMPANY
- Disconnect the front position sensor link (1) from the lower control arm ball stud (2).
Courtesy of GENERAL MOTORS COMPANY
- Loosen the front sensor retaining nut (1).
- Remove the front sensor locating pin from the notch in the frame (2).
- Remove the front position sensor (3).