LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> SS Standard Trans >> Repair and Diagnosis (Single Page) >> General Information >> OEM General Information >> Dangers, Warnings, And Cautions >> Introduction >> Service Programming System (SPS) Caution

Service Programming System (SPS) Caution

CAUTION:

Before programming a control module, the following must be observed, or control module damage may occur:

  • The TIS terminal, MDI, and/or scan tool must have the latest software.
  • The vehicle battery must be fully charged. The battery voltage should be between 12-14 volts.
  • The TIS terminal, MDI, and/or scan tool cable connections must be secure.
  • A battery charger must NOT be connected to the battery when programming a control module.
scientia non olet · About LEMON Manuals