LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> SS Standard Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Power Seat System >> Diagnostic Information and Procedures >> DTC B1850: Driver Seat Lumbar Support Horizontal Position Sensor Circuit >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the scan tool Driver Seat Lumbar Support Horizontal Position parameter is between 0.25 - 4.65 V and changes when the lumbar switch is pressed in both directions.
    • If not between 0.27 - 4.65 V or does not change 

      Refer to Circuit/System Testing

    • If between 0.257 - 4.65 V 
  3. All OK.
scientia non olet · About LEMON Manuals