LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> SS Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System And Pedestrian Protection System >> Repair Instructions >> Advanced Parking Assist Alarm Sensor Replacement >> Installation Procedure

Installation Procedure

NOTE:

Do not refinish previously painted sensors. Excess paint build up will cause the sensor to be inoperative

    Fig 1: Advanced Parking Assist Alarm Sensor
    GM1699865Courtesy of GENERAL MOTORS COMPANY
  1. Insert the sensor into the housing.
  2. Connect the electrical connector to the front object alarm sensor.
  3. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .
scientia non olet · About LEMON Manuals