Installation Procedure
- Install the generator.(1)
- Install Generator Fastener (1) - and tighten 22 N.m (16 lb ft)
- Install Generator Bolt (2) and tighten 22 N.m (16 lb ft)
- Install Battery Positive Cable (3)
- Install Generator Nut (2) and tighten 15 N.m (11 lb ft)
- Connect the electrical connector.(4)
- Install Protective Cap (1)
- Install the drive belt. Drive Belt Replacement
- Install the air cleaner outlet duct. Air Cleaner Outlet Duct Replacement
- Install the air cleaner assembly. Air Cleaner Assembly Replacement
- Connect the negative battery cable. Battery Negative Cable Disconnection and Connection
CAUTION:
Refer to Fastener Caution .