Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Steering Linkage Idler Arm Nut | 63 N.m (46 lb ft) |
| Steering Linkage Inner Tie Rod Retaining Nut | 112 N.m (83 lb ft) |
| Steering Linkage Pitman Arm Nut | 63 N.m (46 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Pitman Arm Nut | 250 N.m (185 lb ft) |
| Steering Linkage Idler Arm Bolt | 150 N.m (111 lb ft) |
| Steering Linkage Outer Tie Rod Nut | |
|
35 N.m (26 lb ft) |
|
60 - 75 degrees |