LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Express 2500 Base, Van Cargo, 6.0L Eng VIN G >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Turn Signal Multifunction Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Turn Signal And Multifunction Switch
    GM2215420Courtesy of GENERAL MOTORS COMPANY
  1. Position the turn signal and multifunction switch (2) on the steering column.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the turn signal and multifunction switch bolts (1) and tighten to 3 N.m (27 lb in).
  3. Connect the turn signal and multifunction switch electrical connector.
  4. Steering Column Lower Trim Cover - Install - Steering Column Trim Cover Replacement 
  5. Steering Column Upper Trim Cover - Install - Steering Column Trim Cover Replacement 
  6. Steering Wheel - Install - Steering Wheel Replacement 
  7. Enable the SIR System. SIR Disabling and Enabling
scientia non olet · About LEMON Manuals