LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions >> Repair Instructions >> Fuel Injector Wiring Harness Replacement >> Removal Procedure

Removal Procedure

  1. Remove Fuel Injection Fuel Rail Assembly Removal and Installation 
    2. Fig 1: Fuel Injection Fuel Rail Fuel Pressure Sensor Wiring Harness Plug And Fuel Rail Fuel Pressure Sensor
    GM3682588Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the fuel injection fuel rail fuel pressure sensor wiring harness plug (1) from the fuel rail fuel pressure sensor (2).
  3. Cut the cable tie (3).
    4. Fig 2: Fuel Injector And Wiring Harness
    GM3682583Courtesy of GENERAL MOTORS COMPANY
  4. Remove 4 the fuel injector wiring harness (3) from the fuel injector (4).
  5. Clip out the fuel injector wiring harness (2) from the fuel rail.
  6. Cut the 7 cable ties (1, 5).
scientia non olet · About LEMON Manuals