Removal Procedure
WARNING:
The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death.
- Relieve the fuel system pressure. - Fuel Pressure Relief
- Disconnect Battery Negative Cable Disconnection and Connection
- Remove Engine Sight Shield Replacement
- Disconnect the electrical connector.(2)
- Remove Fuel Injection Fuel Rail Fuel Pressure Sensor(1) @Fuel Injection Fuel Rail Assembly(3)
Fig 1: Fuel Injection Fuel Rail Assembly, Fuel Injection Fuel Rail Pressure Sensor And Electrical Connector
WARNING:
Refer to Gasoline/Gasoline Vapors Warning .
WARNING:
Refer to Safety Goggles and Fuel Warning .
CAUTION:
Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Caution .
NOTE:
Replace the noise cancelling foam component if it is exposed to and has absorbed automotive fluids.