LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions >> Repair Instructions >> Fuel Feed Pipe Replacement - Fuel Pump Module to Underbody >> Installation Procedure

Installation Procedure

    Fig 1: Electrical Connector And Fuel Pressure Sensor Clip
    GM4091454Courtesy of GENERAL MOTORS COMPANY
  1. Install the fuel tank fuel feed pipe (4) to the fuel tank bracket (5) and the fuel pressure sensor clip (3).
  2. Connect the electrical connector.(2)
  3. Remove the EN-6015  plugs from all connections.
  4. Connect the fuel tank fuel feed pipe (4) to the fuel tank fuel pump module (1). Plastic Collar Quick Connect Fitting Service .
    5. Fig 2: Suitable Jack, Fuel Tank Straps And Bolts
    GM4091478Courtesy of GENERAL MOTORS COMPANY
  5. Install the fuel tank.(1) Fuel Tank Replacement 
  6. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
scientia non olet · About LEMON Manuals