Removal Procedure
- Disconnect Battery Negative Cable Disconnection and Connection
- Remove Front Bumper Fascia Replacement
- Remove Charge Air Cooler Inlet Air Hose@Charge Air Cooler Charge Air Cooler Inlet Air Hose Replacement
- Remove Charge Air Cooler Outlet Air Hose@Charge Air Cooler Charge Air Cooler Outlet Air Hose Replacement
- Disconnect the electrical connector. (1)
- Remove Engine Coolant Fan Shroud Bolt (1, 2)
- Raise the vehicle.
- Pull up the engine coolant fan shroud (1) until it can be put out of the 4 retaining tabs (2, 3).
- Tilt the engine coolant fan shroud (1) as much as possible.
- Retain the engine coolant fan shroud.
- Disconnect the electrical connector.(1)
- Unclip Retainer Clip (1)
- Remove Charge Air Cooler (2) @Radiator Assembly (1)
NOTE:
A second technician is required.