Fastener Specifications (1.6L Diesel LH7)
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Battery Fuse Block to Battery Positive Cable Nut | 12 N.m (106 lb in) |
| Battery Hold Down Retainer Nut | 10 N.m (89 lb in) |
| Battery Negative Cable to Battery Negative Pole Nut | 4.5 N.m (40 lb in) |
| Battery Positive Cable to Battery Positive Pole Nut | 4.5 N.m (40 lb in) |
| Battery Negative Cable to Battery Sensor Nut | 11 N.m (97 lb in) |
| Battery Negative Cable to Rear Floor Panel Nut | 22 N.m (16 lb ft) |
| Battery Positive Cable Nut (Underbody) | 9 N.m (80 lb in) |
| Battery Positive Cable to Fuse Block Nut | 15 N.m (11 lb ft) |
| Battery Tray Bolt | 22 N.m (16 lb ft) |
| Body Extension Wiring Harness Bolt (to Positive and Negative Pole Clamp) | 9 N.m (80 lb in) |
| Engine Wiring Harness Conduit Bolt (to Intake Manifold) | 9 N.m (80 lb in) |
| Engine Wiring Harness Ground Cable Nut | 9 N.m (80 lb in) |
| Fuel Injector Conduit Bolt | 9 N.m (80 lb in) |
| Generator and Starter Cable Generator Lead Nut | 12.5 N.m (111 lb in) |
| Generator and Starter Cable Start Motor Lead Nut | 12.5 N.m (111 lb in) |
| Generator and Starter Cable to Battery Positive Distribution Cable Nut | 15 N.m (11 lb ft) |
| Generator and Starter to Front Body Cable Nut | 9 N.m (80 lb in) |
| Generator Bolt | 22 N.m (16 lb ft) |
| Generator Nut | 22 N.m (16 lb ft) |
| Starter Bolt | 22 N.m (16 lb ft) |
| Starter Ground Cable Bolt | 22 N.m (16 lb ft) |