LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Multifunction Power Supply Converter Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection 
    2. Fig 1: Positive Cable Terminal Cover
    GM4849182Courtesy of GENERAL MOTORS COMPANY
  2. Remove Battery Positive Cable Terminal Cover (1)
  3. Unlock the retaining tabs.
    4. Fig 2: Battery Positive Cable Bolt
    GM4850210Courtesy of GENERAL MOTORS COMPANY
  4. Remove Battery Positive Cable Bolt (2)
  5. Remove Battery Positive Cable (1)
  6. Unlock the retaining tabs.
    7. Fig 3: Battery Positive Cable Terminal
    GM4850211Courtesy of GENERAL MOTORS COMPANY
  7. Remove the battery positive cable terminal (1).
  8. Unlock the retaining tabs.
    9. Fig 4: Electrical Connectors
    GM4850212Courtesy of GENERAL MOTORS COMPANY
  9. Disconnect the electrical connectors.(1)
    10. Fig 5: Retainer
    GM4850214Courtesy of GENERAL MOTORS COMPANY
  10. Retainer (1)
    11. Fig 6: Electrical Connector
    GM4850215Courtesy of GENERAL MOTORS COMPANY
  11. Unclip Electrical Connector (1)
    12. Fig 7: Electrical Connector
    GM4850217Courtesy of GENERAL MOTORS COMPANY
  12. Disconnect Electrical Connector (1)
  13. Disconnect Electrical Connector (2)
    14. Fig 8: Fuel Pump Power Control Module Bracket
    GM4850218Courtesy of GENERAL MOTORS COMPANY
  14. Remove Fuel Pump Power Control Module Bracket (1)
  15. Unlock the retaining tabs.
    16. Fig 9: Multifunction Power Supply Converter
    GM4850220Courtesy of GENERAL MOTORS COMPANY
  16. Remove Multifunction Power Supply Converter (1)
scientia non olet · About LEMON Manuals