LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Ignition Switch/Steering Lock >> Repair Instructions >> Repair Instructions >> Front Compartment Fuse Block Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
    2. Fig 1: Front Compartment Fuse Block Wiring Harness Supply Cover And Components
    GM4091290Courtesy of GENERAL MOTORS COMPANY
  2. Remove the front compartment fuse block wiring harness supply cover (1).
  3. Remove the headlamp wiring harness nut (5).
  4. Remove the power steering wiring harness nut (4).
  5. Remove the battery positive cable bolt (3)
  6. Remove the generator and starter cable nut (2).
    7. Fig 2: Front Compartment Fuse Block Cover And Bolts
    GM4091293Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Bolts (1) are encapsulated on the end of threads so that they can not be removed from the fuse block.

  7. Remove the front compartment fuse block cover (1).
  8. Loosen the 3 front compartment fuse block bolts (2)
    9. Fig 3: Front Compartment Fuse Block Retaining Tabs
    GM3952940Courtesy of GENERAL MOTORS COMPANY
  9. Unlock the 4 retaining tabs (3) and the retaining tab (2) in direction of arrow and remove the front compartment fuse block (1).
scientia non olet · About LEMON Manuals