Removal Procedure
- Disconnect Battery Negative Cable Disconnection and Connection
- Release the 2 retainers (2).
- Remove the battery positive distribution cover (1).
- Remove the battery positive cable bolt (1).
- Remove Rear Compartment Floor Panel Trim
- Fold the left rear seat down for easier access to the battery.
- Release the 10 retainers (1).
- Remove the cover (2).
- Release the 3 retainers (4, 5).
- Remove the cover (3).
- Mark the position of the grommet at the positive cable with a line (1).
- Remove the battery positive cable bolt (3).
- Release the 6 retainers (1) and push the battery positive cable (2) through the body.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the bat positive cable wire tie from the plastic nut (1).
- Unclip Retainer (1)
- Remove 3 wire tie retainers (1, 2) on the rear left body in front of the rear axle.
- Move the complete battery positive cable through the body.
- Remove the 6 battery positive cable retainer nuts (1).
- Remove Battery Positive Cable
NOTE:
For a better access, remove the wire tie through the wheelhouse.