LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Corvette Z06, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Steering Column Control Module Bracket Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
  2. Remove Instrument Panel Insulator Panel Replacement - Left Side
  3. Remove Instrument Panel Knee Bolster Replacement
  4. Disconnect the electrical connectors from the steering column control module and bracket.
    5. Fig 1: Steering Column Control Module Bracket Bolts
    GM3407265Courtesy of GENERAL MOTORS COMPANY
  5. Remove Steering Column Control Module Bracket Bolt (1) (Qty: 2)
  6. Remove Steering Column Bracket Bolt (2)
  7. Remove Steering Column Control Module Bracket (3)
  8. Transfer components as necessary.
scientia non olet · About LEMON Manuals