Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Battery Hold Down Retainer Bracket Fastener | 9 N.m (80 lb in) |
| Battery Negative Cable Clamp Battery Post Fastener | 5 N.m (44 lb in) |
| Battery Negative Cable to Ground Fastener | 22 N.m (16 lb ft) |
| Battery Positive Cable Clamp Battery Post Fastener | 5 N.m (44 lb in) |
| Battery Positive Cable to Accessory Wiring Junction Block Fastener | 15 N.m (11 lb ft) |
| Battery Positive Cable to Rear Cargo Fuse Block Fastener | 9 N.m (80 lb in) |
| Body Harness Terminal to Negative Battery Cable Clamp Fastener | 9 N.m (80 lb in) |
| Generator Cable to Generator Fastener (LT1, LT4) | 22 N.m (16 lb ft) |
| Generator Cable to Pre-Fuse Junction Block Nut (LT1, LT4) | 9 N.m (80 lb in) |
| Generator Mounting Fastener (LT1, LT4) | 58 N.m (43 lb ft) |
| Starter Heat Shield Fastener (LT1, LT4) | 9 N.m (80 lb in) |
| Starter Mounting Fastener (LT1, LT4) | 58 N.m (43 lb ft) |
| Starter Solenoid Cable to Front Compartment Fuse Block Nut (LT1, LT4) | 15 N.m (11 lb ft) |
| Starter Solenoid Cable to Pre-Fuse Junction Block Nut (LT1, LT4) | 15 N.m (11 lb ft) |
| Starter Solenoid Cable to Starter Solenoid Fastener (LT1, LT4) | 14 N.m (124 lb in) |
| Starter Solenoid Cable to Underhood Fuse Block Fastener | 22 N.m (16 lb ft) |