LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Corvette Z06, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Replacement >> Removal Procedure

Removal Procedure

  1. Remove the rear compartment floor panel trim. Refer to Rear Compartment Floor Panel Trim Replacement (North America)Rear Compartment Floor Panel Trim Replacement (Export - CU9, CV5, CZ3, C4E) .
    2. Fig 1: Battery Insulator And Top Of Battery
    GM3407536Courtesy of GENERAL MOTORS COMPANY
  2. Remove the battery insulator (1) from the top of the battery.
  3. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
    4. Fig 2: Rear Cargo Fuse Block Cover And Loosen Battery Fuse Block Clamp Fastener
    GM3409714Courtesy of GENERAL MOTORS COMPANY
  4. Remove the rear cargo fuse block cover (1).
  5. Remove the positive cable nut and remove the cable from the rear fuse block.
  6. Loosen the battery clamp fastener on the positive battery post.
  7. Release the tabs on the rear cargo fuse block (3) and set aside.
    8. Fig 3: Battery Hold Down Retainer Bracket Fasteners And Battery Hold Down Retainer Bracket
    GM3409721Courtesy of GENERAL MOTORS COMPANY
  8. Remove the battery hold down retainer bracket fasteners (1) and remove the battery hold down retainer bracket (2).
    9. Fig 4: Battery Vent Tube And Battery
    GM3412564Courtesy of GENERAL MOTORS COMPANY
  9. Disconnect the battery vent tube (2) from the battery (1).
  10. Remove the battery (1) from the rear cargo area.
scientia non olet · About LEMON Manuals