Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Caliper Dust Boot Seal |
| Brake Caliper Piston Seal |
| Brake Hose Fitting Gasket |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Caliper Bleeder - J55, JL9 (Front and Rear) | 12-16 N.m (106 lb in-12 lb ft) |
| Brake Caliper Bleeder - J56 (Front) | 17-20 N.m (13-15 lb ft) |
| Brake Caliper Bleeder - J56 (Rear) | 12-16 N.m (106 lb in-12 lb ft) |
| Brake Caliper Bleeder - J57 (Front and Rear) | 17-20 N.m (13-15 lb ft) |
| Brake Caliper Bolt - Front | 220 N.m (162 lb ft) |
| Brake Caliper Bolt - Rear | 120 N.m (89 lb ft) |
| Brake Caliper Bridge Pin Bolt | 30 N.m (22 lb ft) |
| Brake Hose Fitting Bolt - Front and Rear | 40 N.m (30 lb ft) |
| Brake Rotor Bolt - JL9, J55 (Front) | 12 N.m (106 lb in) |
| Brake Rotor Bolt - J56, J57 (Front) | 10 N.m (89 lb in) |
| Brake Rotor Bolt - Rear | 10 N.m (89 lb in) |
| Front Brake Shield Bolt | 10 N.m (89 lb in) |