Circuit/System Testing
- Ignition/Vehicle - Off
- Remove the component:Q6 Camshaft Position Actuator Solenoid Valve
- Verify the condition does not exist:
- Torn, restricted, mis-positioned, or missing screens.
- Engine oil leak between the oil sealing lands of the solenoid. Inspect the lands of the solenoid for nicks.
- Oil seepage at the solenoid connector.
- If a condition exists
Replace the component:Q6 Camshaft Position Actuator Solenoid Valve
- Go to next step: If no condition exists
- Test or replace the component:Q6 Camshaft Position Actuator Solenoid Valve