LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Caprice 3.6L Eng VIN 3 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L (LFX) - Repair Instructions >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Manifold Absolute Pressure Sensor (LFX)
    GM2219477Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW MAP sensor seal.
  2. Install the MAP sensor (2) to the intake manifold assembly.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the MAP sensor to intake manifold retaining bolt (1) and tighten to 4 N.m (35 lb in).
  4. Connect the engine wiring harness to the manifold absolute pressure (MAP) sensor (2).
scientia non olet · About LEMON Manuals