LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Caprice 3.6L Eng VIN 3 >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Auxiliary Battery Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Vent Plug
    GM4888560Courtesy of GENERAL MOTORS COMPANY
  1. If you are replacing the battery with a serviced NEW battery, detach the vent plug (1), that comes with the positive post cover.
    2. Fig 2: Vent Plug And Battery Vent Hose
    GM4888677Courtesy of GENERAL MOTORS COMPANY
  2. Install the vent plug (1), opposite side of the battery vent hose (2).
    3. Fig 3: Auxiliary Battery Brace
    GM2545206Courtesy of GENERAL MOTORS COMPANY
  3. Install the auxiliary battery (3) with the hold down retainer (2) and the auxiliary battery tray bracket (1).
  4. Install the auxiliary battery vent hose.
    5. Fig 4: Auxiliary Battery Tray Bracket Nut
    GM2545209Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  5. Install the auxiliary battery tray bracket nut (1) and tighten to 20 N.m (15 lb ft).
  6. Install the auxiliary battery hold down retainer bolt (2) and tighten to 22 N.m (16 lb ft).
    7. Fig 5: Auxiliary Battery Negative Post Clamp Nut
    GM2545212Courtesy of GENERAL MOTORS COMPANY
  7. Install the auxiliary negative battery cable (2) and tighten the clamp nut (1) to 9 N.m (80 lb in)..
  8. Install the rear compartment side trim panel. Refer to Rear Compartment Side Trim Panel Replacement (Left Side)Rear Compartment Side Trim Panel Replacement (Right Side) .
  9. Connect the primary negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Primary Battery) Battery Negative Cable Disconnection and Connection (Auxiliary Battery) .
scientia non olet · About LEMON Manuals