Installation Procedure
- Install Rear Wheel Speed Sensor (1)
- Install and tighten Rear Wheel Speed Sensor Bolt (1) to 10 N.m (89 lb in)
- Secure Retainers (1) (Qty: 2)
- Secure Retainer (1)
- Secure Rear Wheel Speed Sensor Electrical Connector Retainer (1)
- Connect Rear Wheel Speed Sensor Electrical Connector
- Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
- Perform the diagnostic system check. Refer to Diagnostic System Check - Vehicle
CAUTION:
Refer to Fastener Caution