LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Camaro SS, 2D Convertible, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LT1) >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection 
    2. Fig 1: Radiator Outlet Hose
    GM4179802Courtesy of GENERAL MOTORS COMPANY
  2. Remove Radiator Outlet Hose (1) Radiator Outlet Hose Replacement (LT1 with V18 V03)
    3. Fig 2: Radiator Surge Tank
    GM4178662Courtesy of GENERAL MOTORS COMPANY
  3. Remove Radiator Surge Tank (6)Radiator Surge Tank Replacement (LT1 LT4)
    4. Fig 3: Starter Solenoid Cable
    GM4210404Courtesy of GENERAL MOTORS COMPANY
  4. Remove Generator Fastener (1)
  5. Remove Starter Solenoid Cable (2)
  6. Remove Electrical Connector (3)
    7. Fig 4: Drive Belt Tensioner
    GM4204921Courtesy of GENERAL MOTORS COMPANY
  7. Remove Drive Belt Tensioner (3)Drive Belt Tensioner Replacement - Accessory (LT1)
    8. Fig 5: Generator Bolt
    GM4210406Courtesy of GENERAL MOTORS COMPANY
  8. Remove Generator Bolt (1)
  9. Remove Generator (2)
scientia non olet · About LEMON Manuals