Installation Procedure
- Install Battery (4)
- Install Battery Hold Down Retainer (3)
- Install Battery Hold Down Bolt (2) and tighten 22 N.m (16 lb ft)
- Install Battery Vent Tube (1)
- Install Rear Body Fuse Block (3)
- Battery Positive Post Clamp Nut (2) Tighten 4.5 N.m (40 lb in)
- Install Rear Body Fuse Block Cover (1)
- Connect the negative battery cable. Battery Negative Cable Disconnection and Connection
- Install Rear Compartment Side Trim. Rear Compartment Side Trim Replacement - Right Side (Coupe)Rear Compartment Side Trim Replacement - Right Side (Convertible)
CAUTION:
Refer to Fastener Caution