Circuit/System Verification
- Vehicle ON.
- Verify that DTC B1405 is not set.
- If the DTC is set
Refer to DTC B1405
- If the DTC is not set
- If the DTC is set
- Verify that DTC B0958 01, B0960 01 or B0961 01 is not set.
- If the DTC is set
Check the appropriate B306 Parking Assist Sensor for contamination with mud. If no contamination is diagnosed, refer to Circuit/System Testing.
- If the DTC is not set
- If the DTC is set
- Verify that DTC B0958 22, B0960 22 or B0961 22 is not set.
- If the DTC is set
Check the appropriate B306 Parking Assist Sensor for contamination with mud, ice or snow. If no contamination is diagnosed, replace the sensor.
- If the DTC is not set
- If the DTC is set
- Verify that DTC B0958 3A, B0958 3B, B0960 3A B0960 3B B0961 3A or B0961 3B is not set.
- If the DTC is set
Replace the appropriate B306 Parking Assist Sensor with a sensor of the correct sensor type.
- If the DTC is not set
- If the DTC is set
- Vehicle ON, transmission in REVERSE, verify the scan tool Parking Assist System Status parameter displays Enabled.
- If the Parking Assist System displays Disabled
Refer to Circuit/System Testing.
- If the Parking Assist System displays Enabled
- If the Parking Assist System displays Disabled
- All OK.