LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Mass Airflow Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Mass Airflow Sensor And Bolts
    GM4091004Courtesy of GENERAL MOTORS COMPANY
  1. Install Mass Airflow Sensor (1)
    2. CAUTION:

    Refer to Fastener Caution

  2. Install and tighten Mass Airflow Sensor Bolt (2) (Qty: 2) to 2.5 N.m (22 lb in)
    3. Fig 2: Air Cleaner Upper Housing And Bolts
    GM4091003Courtesy of GENERAL MOTORS COMPANY
  3. Install Air Cleaner Upper Housing (2)
  4. Install and tighten Air Cleaner Upper Housing Bolt (1) (Qty: 5) to 2.5 N.m (22 lb in)
    5. Fig 3: Air Cleaner Outlet Duct, Air Cleaner Assembly, Clamp And Electrical Connector
    GM4090998Courtesy of GENERAL MOTORS COMPANY
  5. Install Air Cleaner Outlet Duct (3) @ Air Cleaner Assembly (4)
  6. Tighten Air Cleaner Outlet Duct Clamp (2) to 2.5 N.m (22 lb in)
  7. Connect the electrical connector (1).
  8. When the replacement is completed, use a scan tool to perform the appropriate reset functions. Refer to Control Module References
scientia non olet · About LEMON Manuals