LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Fuel Tank Replacement >> Assemble Procedure

Assemble Procedure

    Fig 1: Fuel Tank Heat Shield
    GM4091019Courtesy of GENERAL MOTORS COMPANY
  1. Install Fuel Tank Heat Shield (1)
  2. Install Fuel Tank Fuel Pump Module. Refer to Fuel Tank Fuel Pump Module Replacement »Install
    3. Fig 2: Fuel Pump Feed Hose, Evaporative Emission Canister Hose, Evaporative Emission Rear Hose, Electrical Connector, Fuel Pump Module Wiring Harness And Retainers
    GM4091018Courtesy of GENERAL MOTORS COMPANY
  3. Connect the electrical connector (6).
  4. Install Evaporative Emission Rear Hose (3). Refer to Plastic Collar Quick Connect Fitting Service 
  5. Install the evaporative emission canister hose (1). Refer to Plastic Collar Quick Connect Fitting Service .
  6. Install Fuel Pump Fuel Feed Hose (8). Refer to Plastic Collar Quick Connect Fitting Service 
  7. Install Retainer (2, 5, 7)
scientia non olet · About LEMON Manuals