Installation Procedure
Courtesy of GENERAL MOTORS COMPANY
- Install the fuel feed pipe (2) to the vehicle.
- Install Fuel Feed Pipe (2) @ Retainer (1) (Qty: 3)
- Close the 3 retainers (1).
Courtesy of GENERAL MOTORS COMPANY
- Install Fuel Feed Pipe (1) @ Retainer (2)
- Remove all EN-6015
plugs from the connections.
- Connect Fuel Feed Pipe (1) @ Fuel Pump Fuel Feed Hose (3). Refer to Plastic Collar Quick Connect Fitting Service
- Close the retainer (2).
Courtesy of GENERAL MOTORS COMPANY
- Connect the electrical connector (2).
- Install Fuel Feed Pipe (3) @ Retainer (1)
- Close the retainer (1).
Courtesy of GENERAL MOTORS COMPANY
- Install Fuel Feed Pipe (2) @ Retainer (1) (Qty: 2)
- Close the 2 retainers (1).
- Install Drivetrain and Front Suspension Cradle. Refer to Drivetrain and Front Suspension Cradle Installation
- Install Underbody Front Air Deflector - Left Side. Refer to Underbody Front Air Deflector Replacement - Left Side
- Install Underbody Rear Air Deflector. Refer to Underbody Rear Air Deflector Replacement
- Lower the vehicle.
Courtesy of GENERAL MOTORS COMPANY
- Install Fuel Feed Pipe (2) @ Retainer (1)
- Close the retainer (1).
- Remove all EN-6015
plugs from the connections.
- Connect Fuel Feed Front Pipe (3) @ Fuel Feed Pipe (2). Refer to Metal Collar Quick Connect Fitting Service
- Connect Battery Negative Cable. Refer to Battery Negative Cable Disconnection and Connection
- Cycle the ignition to run the fuel pump and check for fuel leaks.