LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Fuel Feed Front Pipe Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Fuel Feed Front Pipe And Fuel Injection Pump
    GM4091024Courtesy of GENERAL MOTORS COMPANY
  1. Install Fuel Feed Front Pipe (2)
  2. Remove all EN-6015  plugs from the connections.
  3. Connect Fuel Feed Front Pipe (2) @ Fuel Injection Pump (1)
    4. Fig 2: Fuel Feed Pipe, Fuel Feed Front Pipe And Retainer
    GM4091022Courtesy of GENERAL MOTORS COMPANY
  4. Remove all EN-6015  plugs from the connections.
  5. Connect Fuel Feed Front Pipe (2) @ Fuel Feed Pipe (1). Refer to Plastic Collar Quick Connect Fitting Service 
  6. Install Fuel Feed Front Pipe (2) @ Retainer (3)
  7. Install Air Cleaner Outlet Duct. Refer to Air Cleaner Outlet Duct Replacement 
  8. Connect Battery Negative Cable. Refer to Battery Negative Cable Disconnection and Connection
  9. Cycle the ignition to run the fuel pump and check for fuel leaks.
scientia non olet · About LEMON Manuals