LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Exhaust Gas Recirculation Cooler Temperature Sensor Replacement - Position 2 >> Installation Procedure

Installation Procedure

    Fig 1: EGR Cooler Temperature Sensor, EGR Cooler, Wiring Harness Clip And Electrical Connector
    GM4091553Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution

  1. Install and tighten Exhaust Gas Recirculation Cooler Temperature Sensor (2) to 42 N.m (31 lb ft)
  2. Install Exhaust Gas Recirculation Cooler Temperature Sensor (2) @ Wiring Harness Clip (4) (Qty: 2)
  3. Connect the electrical connector (1).
  4. Install Three-Way Catalytic Converter. Refer to Three-Way Catalytic Converter Replacement
  5. Install Intake Manifold Cover. Refer to Intake Manifold Cover Replacement
  6. Connect Battery Negative Cable. Refer to Battery Negative Cable Disconnection and Connection
scientia non olet · About LEMON Manuals