LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Volt Premier >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove Fuel Tank Fuel Pump Module. Refer to Fuel Tank Fuel Pump Module Replacement 
    2. Fig 1: Fuel Level Sensor, Fuel Pump Module, Retaining Brackets And Electrical Connector
    GM4091067Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the electrical connector (1).
  3. Push the 2 retaining brackets (3) in direction of arrows.
  4. While holding the 2 retaining brackets (3) move the fuel level sensor (2) upwards and remove the fuel level sensor (2) from the fuel pump module (4).
scientia non olet · About LEMON Manuals