Installation Procedure
- Install Air Cleaner Outlet Duct (2) @ Throttle Body (1)
- Install Air Cleaner Outlet Duct (2) @ Air Cleaner Assembly (3)
- Connect Positive Crankcase Ventilation Tube (3). Refer to Plastic Collar Quick Connect Fitting Service
- Tighten Air Cleaner Outlet Duct Clamp (1, 4) to 2.5 N.m (22 lb in)
- Install and tighten Air Cleaner Outlet Duct Fastener (2) to 9 N.m (80 lb in)
- Install Dash Upper Extension Panel Opening Cover. Refer to Dash Upper Extension Panel Opening Cover Replacement
- Install Intake Manifold Cover. Refer to Intake Manifold Cover Replacement
CAUTION:
Refer to Fastener Caution
NOTE:
Ensure the outlet duct is fully seated to the mating surfaces before clamping. Verify that the cuff is not rolled under.