LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Trax LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Current Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Battery Negative Cable & Current Sensor
    GM2027819Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Note the orientation of the battery current sensor.

  1. Install the current sensor (2) to the battery negative cable (1).
  2. Install the battery negative cable. Refer to Battery Negative Cable Replacement .
scientia non olet · About LEMON Manuals