LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Trax LS, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Battery
    GM2776007Courtesy of GENERAL MOTORS COMPANY
  1. Install the battery (2) into the battery tray.
    2. Fig 2: Battery Hold Down Fastener And Battery Retainer Strap
    GM2776004Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install the battery hold down strap (2) and tighten the fastener (1) to 22 N.m (16 lb ft).
    3. Fig 3: Battery Fuse Block Cover
    GM2775999Courtesy of GENERAL MOTORS COMPANY
  3. Install the battery fuse block (3) to the battery positive post and tighten the battery positive post clamp fastener (1) to 4.5 N.m (40 lb in).
  4. Install the battery fuse block cover (2).
  5. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (without KL9) Battery Negative Cable Disconnection and Connection (with KL9) .
scientia non olet · About LEMON Manuals