Installation Procedure

Fig 1: Rear Floor Panel Exhaust Heat Shield Nuts And Heat Shield

Courtesy of GENERAL MOTORS COMPANY

CAUTION:

Position the rear floor panel exhaust heat shield to the studs and install the heat shield nuts and tighten to 9 N.m (80 lb in).

Fig 2: Floor Panel Exhaust Heat Shield Nuts & Heat Shields

Courtesy of GENERAL MOTORS COMPANY

If the vehicle is a Suburban, Yukon XL, Yukon Denali XL, Escalade ESV, Escalade EXT or a Avalanche, position the exhaust heat shield to the studs and install the heat shield nuts, as required and tighten to 9 N.m (80 lb in).

Fig 3: Floor Panel Exhaust Heat Shield Nuts And Heat Shields

Courtesy of GENERAL MOTORS COMPANY

If the vehicle is a Tahoe, Yukon, Yukon Denali, or a Escalade, position the exhaust heat shield to the studs and install the heat shield nuts, as required and tighten to 9 N.m (80 lb in).

Fig 4: Left Front Floor Panel Exhaust Heat Shield Nuts And Heat Shield

Courtesy of GENERAL MOTORS COMPANY

Position the left front floor panel exhaust heat shield to the studs and install the heat shield nuts and tighten to 9 N.m (80 lb in).
Install the exhaust muffler with resonator, exhaust, and tail pipe assembly, as required. Refer to Exhaust Muffler with Resonator, Exhaust, and Tail Pipe Replacement .