LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Suburban 3500 HD LT >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Diagnostic Information and Procedures >> Traction Control/Stability Control Indicator Malfunction >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the X1 harness connector at the S48A Multifunction Switch - Instrument Panel.
  2. Test for infinite resistance between the signal circuit terminal 17 and the ground terminal 14 with the switch in the open position.
    • If less than infinite resistance 

      Replace the S48A Multifunction Switch - Instrument Panel.

    • If infinite resistance 
  3. Test for less than 2 Ω between the signal terminal 17 and the ground terminal 14 with the switch in the closed position.
    • If 2 Ω or greater 

      Replace the S48A Multifunction Switch - Instrument Panel.

    • If less than 2 Ω 
  4. All OK.
scientia non olet · About LEMON Manuals