Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 GMC Yukon XL, 2016 GMC Yukon, 2016 Chevrolet Tahoe, 2016 Chevrolet Suburban, and 2016 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.
- Inspect the EBCM to BPMV gasket for damage and replace, if necessary.
- Install the EBCM (1) to the BPMV.
- Install the EBCM bolts (1) and tighten in a cross pattern to 3 N.m (27 lb in).
- Connect the EBCM electrical connector.
- Program the EBCM. Refer to Electronic Brake Control Module Programming and Setup .
CAUTION:
Refer to Fastener Caution .