Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 GMC Yukon XL, 2016 GMC Yukon, 2016 Chevrolet Tahoe, 2016 Chevrolet Suburban, and 2016 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.

Place the ignition switch in the OFF position.
Remove the brake pressure modulator valve (BPMV) assembly. Refer to Brake Pressure Modulator Valve Replacement .

Fig 1: BPMV Bolt

Courtesy of GENERAL MOTORS COMPANY

Remove the BPMV bolt (1).

Fig 2: BPMV Bracket

Courtesy of GENERAL MOTORS COMPANY

NOTE:

Do not pry on the accumulator caps on the underside of the BPMV.

Carefully separate the BPMV assembly from the BPMV bracket insulators and remove the BPMV bracket (1).
Inspect the insulators for damage and replace, if necessary.