LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Front Suspension System) >> Repair Instructions >> Wheel Stud Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a NEW wheel stud to the wheel hub.
    Fig 1: Wheel Hub Flange, Lug Nut And Washers
    GM2327497Courtesy of GENERAL MOTORS COMPANY
  2. Add enough washers (3) in order to draw the stud into the hub.
  3. Install the wheel nut (1).
  4. Tighten the wheel nut until the head of the wheel stud is fully seated against the back of the wheel hub flange (2).
  5. Remove the wheel nut (1) and the washers (3).
  6. Install the front wheel hub. Refer to Front Wheel Bearing and Hub Replacement .
  7. Install the brake rotor and install the brake caliper and bracket as an assembly. Refer to Front Brake Rotor Replacement .
  8. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  9. Lower the vehicle.
scientia non olet · About LEMON Manuals