LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Repair Instructions >> Fuel Tank Heat Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Fuel Tank Heat Shield And Retainer
    GM4663602Courtesy of GENERAL MOTORS COMPANY
  1. Install Fuel Tank Heat Shield (2)
  2. Install Fuel Tank Heat Shield Retainer (1)
    3. Fig 2: Fuel Tank Strap Bolt
    GM4663601Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  3. Install Fuel Tank Strap (2)
  4. Install Fuel Tank Strap Bolt (1) and tighten 22 N.m (16 lb ft)
  5. Install Exhaust Muffler Exhaust Muffler Replacement (L5Q) Exhaust Muffler Replacement (LV7) 
  6. Lower the vehicle. Lifting and Jacking the Vehicle
scientia non olet · About LEMON Manuals