LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
    2. Fig 1: Battery Positive Cable Junction Block Cover
    GM4009332Courtesy of GENERAL MOTORS COMPANY
  2. Open the battery positive cable junction block cover (1) from the battery.
    3. Fig 2: Battery Positive Cable Junction Block Post Nut
    GM4009330Courtesy of GENERAL MOTORS COMPANY
  3. Remove the battery positive cable junction block post nut (1).
  4. Remove the battery positive cable junction block (2) and set aside.
    5. Fig 3: Battery Bracket Bolt And Battery Bracket
    GM4009331Courtesy of GENERAL MOTORS COMPANY
  5. Remove the battery bracket bolt (2) and the battery bracket (3).
  6. Remove the battery (1).
scientia non olet · About LEMON Manuals