LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Battery Negative Cable
    GM4009336Courtesy of GENERAL MOTORS COMPANY
    WARNING:

    Refer to Battery Disconnect Warning .

  1. Remove the body wiring harness cable nut (1) and the body wiring harness cable (3).
  2. Remove the battery negative cable nut (2) and the battery negative cable (4).
  3. Remove the battery. Refer to Battery Replacement .
    4. Fig 2: Body Harness Connector And Battery Current Sensor
    GM4009328Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the body harness connector (1) from the battery current sensor (2).
  5. Remove the battery negative and positive cable ground nut (3) and the battery negative cable from the frame rail.
    6. Fig 3: Battery Current Sensor And Battery Negative Cable
    GM4009329Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Note the orientation of the battery current sensor when removing.

  6. Remove the battery negative cable (1) from the battery current sensor (2).
scientia non olet · About LEMON Manuals