LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Spark EV >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Tray Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
    2. Fig 1: Protective Cover
    GM2917974Courtesy of GENERAL MOTORS COMPANY
  2. Remove the protective cover (1) from the battery positive cable.
  3. Remove the battery positive cable clamp fastener (2) and detach the battery positive cable (3), from the battery post.
    4. Fig 2: Battery Hold Down Retainer Fastener
    GM3213054Courtesy of GENERAL MOTORS COMPANY
  4. Remove the battery hold down retainer fastener (1) and remove the battery hold down retainer (2).
    5. Fig 3: Battery
    GM3213057Courtesy of GENERAL MOTORS COMPANY
  5. Remove the battery (1) from the engine compartment.
    6. Fig 4: Battery Positive Cable Retainer
    GM3213086Courtesy of GENERAL MOTORS COMPANY
  6. Detach the battery positive cable retainer (1) from the battery tray.
    7. Fig 5: Battery Positive Cable Retainers
    GM2917965Courtesy of GENERAL MOTORS COMPANY
  7. Detach the battery positive cable retainers (1) from the battery tray and bracket.
  8. Remove the radiator surge tank clamp bracket. Refer to Radiator Surge Tank Clamp Bracket Replacement (Right Side)Radiator Surge Tank Clamp Bracket Replacement (Left Side) .
    9. Fig 6: Engine Control Module Bracket
    GM3216629Courtesy of GENERAL MOTORS COMPANY
  9. Detach the engine control module bracket (3) from the battery tray (2).
  10. Remove the battery tray fasteners (1).
  11. Remove the battery current sensor from the battery tray.
    12. Fig 7: Battery Tray
    GM3216630Courtesy of GENERAL MOTORS COMPANY
  12. Remove the battery tray (1) from the vehicle.
scientia non olet · About LEMON Manuals