LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Sonic RS, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Steering Gear Boot Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Steering Gear Boot
    GM2375391Courtesy of GENERAL MOTORS COMPANY
  1. Loosely install Steering Gear Boot Inner Clamp (3) @ Steering Gear Boot (2)

    Install a NEW clamp.

  2. Apply the lubricant from the service kit to the steering linkage inner tie rod and to the steering gear boot.
  3. Install Steering Gear Boot (2)
    4. Fig 2: Steering Gear Inner Boot Clamp
    GM2028057Courtesy of GENERAL MOTORS COMPANY
  4. Use the CH-804  tensioner to tighten the steering gear boot inner clamp (1).
    5. Fig 3: Steering Linkage Inner Tie Rod Nut
    GM2028056Courtesy of GENERAL MOTORS COMPANY
  5. Install Steering Gear Boot Outer Clamp (2)
  6. Install Steering Linkage Inner Tie Rod Nut (1)
  7. Install Steering Linkage Outer Tie Rod. Refer to Steering Linkage Outer Tie Rod Replacement 
  8. Measure and adjust the front toe. Refer to Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
scientia non olet · About LEMON Manuals