LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Sonic RS, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Battery Current Sensor, Negative Cable & Mounting Components
    GM2507827Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Disconnect the battery current sensor from the body harness connector.
  3. Unclip the battery current sensor from the battery tray.
  4. Remove the battery tray. Refer to Battery Tray Replacement .
  5. Remove the battery negative cable frame ground nut (4) and terminal (5).
    6. Fig 2: Battery Negative Cable & Current Sensor
    GM2027819Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Observe the position of the battery current sensor when removing.

  6. Slide the battery current sensor (2) off the battery negative cable (1).
scientia non olet · About LEMON Manuals